Chain-wire mesh

View price - Metal mesh

The metal wire mesh GOST 5336-80 is made of low-carbon and thermally raw galvanized or steel light wire in accordance with GOST 3282-74 or according to TU 14-4-1563-89. It is made of a wire bent into flat spirals, the spirals are intertwined with each other with turns without gaps. The ends on the ends are cut and fastened with a twist or bent towards the helix. Then the net is wound into a roll, weighing no more than 80 kg. Standard roll height is 1.5 m, 1.8 m and 2.0 m. In one roll can be 10, 15, 20 or 25 meters of net. The dimensions of the cells of the sect can be in the range from 10 to 100 mm, and the diameter of the wire is from 1 to 5 mm.

Applies a wire mesh in agriculture, engineering, energy, mining, for sifting bulk materials, for reinforcement and metal mesh for plaster , for heat protection of industrial equipment and pipelines, for conveyor dryers, protective flaps for ventilation and other mines, to strengthen the mountain mounds , slopes; for the manufacture of household metal beds, cages for animals and birds, is also widely used metal mesh for fencing and fences .

The wire mesh can be: uncoated (light), galvanized (has the highest corrosion resistance), welded mesh with polymer coating ( PVC ).

The density of woven mesh is made:

- low density - M
- normal density - H

The wicker mesh cells are square (with sides from 20 mm) and rhombic (with a diamond angle of 60 degrees).

Table. One straw wire mesh in accordance with GOST 5336-80. Theoretical weight per square meter of mesh, kg

РSize of cell side, cell spacing, mm	Wire diameter, mm	Density	Mass sq. m of grid, kg
With rhombic cell
3	1,0	Н	5,40
4	1,0		3,98
	1,2		5,74
Wired mesh 5x5	1,0		3,12
	1,2		4,52
6	1,0		2,59
	1,2		3,73
8	1,0	М	1,93
	1,2	Н	2,78
	1,4		3,80
10x10 metal meshх10	1,2		2,20
	1,4		3,00
12	1,2	М	1,82
	1,4	Н	2,48
	1,6		3,24
15	1,4	М	1,97
	1,6		2,57
	1,8		3,25
Diamond cell
20	1,6	М	1,71
	2,0		2,66
25	2,0		2,15
	2,5		3,36
30	2,0		1,81
	2,5		2,82
35	2,0		1,56
	2,5		2,44
45	2,0		1,20
	2,5		1,87
	3,0		2,70
50	2,5		1,68
	3,0		2,42
60	3,0		2,00
	4,0		3,56
80	4,0		2,76
100	4,0		2,18
	5,0		3,40

At present, a mesh netting with cells is also being made: 50х50х1.8 mm in rolls 1.5 m * 10 m (weight of the roll is 11-12 kg), 1.8 m * 10 m (13-14 kg), 2.0 * 10 m (15-16 kg) 50х50х2.0 mm in a roll of 1.5 m * 10 m (weight of a roll is 13-14 kg), 1.8 m * 10 m (16-17 kg) 50х50х1.7 mm in a roll of 1.5 m * 10 m (9-10 kg), 1.8 m * 10 m (12-13 kg)

woven wire mesh

woven wire mesh - a product formed by interlacing mutually perpendicular wires. The diameter of the cells can be from 0 to 20 mm. The woven wire mesh is distinguished by the material from which it is made, the coating, the diameter of the wire and the size of the cells. It is made of high- and low-alloyed steel, of non-ferrous alloys and metals.

Wire mesh woven GOST 3187-76 - mesh with a zero cell size - the wires are adjacent to each other closely. This mesh is used in the filtration of various solutions, drying and dehydration.

Woven wire mesh GOST 3826-82 - mesh with a mesh size of 0.023-20 mm, used for the manufacture of separators, sieves, metal mesh for filters , in air cleaning systems, for filtering liquids and gases, for reinforcing material during plastering.

Buy metal mesh

You can buy a netting chain, woven mesh, welded mesh of all types produced from warehouses of branches, warehouses of the Moscow region or directly from the factory. We provide services for cutting, delivery and assembly of metal mesh. Availability, range of mesh, weight and price per square meter. m you can see on the site. For more information on the cost, specify the size, make the calculation of the quantity, draw up an invoice and make a request, clarify payment options and request a certificate - you can contact the manager by contacting him

phone (8452) 57-00-18, e-mail: korneev@metallotorg.ru